ABOUT FIREPLACES

A Raleigh NC fireplace is an architectural element consisting of a space designed to contain a fire, generally for heating but sometimes also for cooking. The space where the fire is contained is called a firebox, a chimney or other flue allows gas and particulate exhaust to escape the building. While most fireplaces are constructed in building interiors, sometimes outdoor fireplaces are created for evening warmth, outdoor cooking or decorative purposes.

A Raleigh NC fireplace may consist of some or all of the following elements: foundation, hearth, firebox, facing, ash dump door, chimney crane, cleanout door, grate or iron bars, lintel, lintel bar, over mantle, breast, damper, smoke chamber, throat, flue, chimney chase, crown, cap or shroud, and spark arrestor.

The homeowner wished to have a wood burning 'Zero Clearance' fireplace installed on this wall of their livingroom. The trick here was to build it in such a way so that the finished face of the fireplace would be flush with the existing wall.	Here we see the exterior of the same wall depicted above.	After opening up the wall at the desired location, we framed a rough opening, complete with a header to support the exterior wall where the old studs were removed. Note that the new framing members are kept a safe distance off of the fireplace box.	The bricks have been cut away and new walls were framed up to enclose the fireplace box. Further, a 'chase' was built to cover the insulated steel chimney.
Once the framing was complete, we proceeded to patch up the drywall.	The drywall repairs were completed with a coat of primer. The homeowner elected to finish off the fireplace mantel and paint at a later date.	The exterior alterations were completed with vinyl siding.

Here's a picture of the completed fireplace mantel.

TYPES OF FIREPLACES

Masonry (brick or stone fireplaces and chimneys) with or without tile lined flue. Tiles are used to line the flue to keep the corrosive combustion products from eating away the chimney flue lining.

Reinforced Concrete Chimneys: Popular during the 1970s to 1980s. Fundamental flaws (the difference in thermal expansion rates between steel rebar and concrete which caused the chimney flues to crack when heated) bankrupted the US manufacturers and obsolete the technique. This type of chimney often shows vertical cracks on the exterior of the chimney which worsen as the internal rebar rusts.

Manufactured or 'Prefab' fireplace with sheet metal fire box and double or triple walled metal pipe running up inside a wood framed chase with a chase cover and cap/spark arrestor at the top to keep birds out and sparks in. Within about one hundred meters from salt water this type of chimney is subject to rusting. Otherwise it's competitive to the masonry chimney.

 Fireplaces1  Fireplaces2  Fireplaces3  Fireplaces4